Lattice Semiconductor OpenLDI/FPD-LINK/LVDS Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 45

Lattice Semiconductor OpenLDI/FPD-LINK/LVDS Скачать руководство пользователя страница 40

OpenLDI/FPD-LINK/LVDS Receiver Interface IP

User Guide

© 2017-2019 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at

www.latticesemi.com/legal

All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

40

FPGA-IPUG-02021-1.1

5.10.

Hardware Evaluation

The OpenLDI/FPD-LINK/LVDS Receiver Interface IP supports Lattice’s IP hardware evaluation capability, so you can
create versions of the IP that operate in hardware for a limited period of time without requiring the request of an IP
license. It may also be used to evaluate the IP in hardware in user-defined designs.

5.10.1.

Enabling Hardware Evaluation in Diamond

Choose Project > Active Strategy > Translate Design Settings. The hardware evaluation capability may be enabled or
disabled in the Strategy dialog box. It is enabled by default.

5.11.

Updating/Regenerating the IP

The Clarity Designer user interface allows you to update the local IPs from the Lattice IP server. The updated IP can be
used to regenerate the IP in the design. To change the parameters of the IP used in the design, the IP must also be
regenerated.

5.11.1.

Regenerating an IP in Clarity Designer

To regenerate IP in Clarity Designer:

1.

In the Builder tab, right-click the IP instance to be regenerated and select Config from the menu as shown in

Figure 5.9. IP Regeneration in Clarity Designer

2.

The IP Configuration user interface is displayed. Change the parameters as required and click the Configure button.

3.

Click

in the toolbox. Clarity Designer regenerates all the instances which are reconfigured.

«
...
38
39
40
41
42
...
»

Содержание OpenLDI/FPD-LINK/LVDS














































Отзывы:

Нет отзывов