HDMI VIP Input Bridge Board
Evaluation Board User Guide
© 2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
www.latticesemi.com/legal
. All other brand or product names are
trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
4
FPGA-EB-02008-1.0
Introduction
This document describes the Lattice Semiconductor HDMI
®
VIP Input Bridge Board. This board is designed to work with
the Lattice Video Interface Platform board interconnect system. The key component of this board is the Lattice
Semiconductor SiI1127A HDMI Deep Color Receiver.
The contents of this user guide include descriptions of board components, schematics, and bill of materials.
1.1.
Features
Key features of the HDMI VIP input bridge board include:
SiI1127A HDMI Deep Color Receiver
Supports Deep Color video resolution up to 12-bit, 1080p at 60 Hz
Video Input:
Two HDMI/DVI-compatible ports
The TMDS™ core runs at 25 MHz – 225 MHz
Dynamic cable equalization automatically detects the equalization required for the incoming signal
Video Output:
xvYCC to extended RGB
36-bit RGB/YCbCr 4:4:4
16/20/24-bit YCbCr 4:2:2
8/10/12-bit YCbCr 4:2:2 (ITU BT.656)
No HDCP support
Two Single-Link 19-pin HDMI Type-A connectors
Two 60 pin Rugged High-Speed Headers
Figure 1.1
shows the top view of the HDMI VIP input bridge board and its key components.
Figure 1.2
on page 5 shows
the bottom view of the board.
Status and
User LEDs
HDMI Type A
Connectors
Status and
User LEDs
SW2
Sil1127A
SW1
User LED
Figure 1.1. Top Side of HDMI VIP Input Bridge Board
