Lathem PC600 Series, Руководство пользователя

Страница: 21 / 96

P A Y C L O C K & P C 6 0 0 U S E R ’ S G U I D E
15
•
Using the numeric key pad, enter the address you want to
assign to the terminal and press OK.
•
When finished, press the back
2
button until you have
returned to the default screen.
Network Setup - Host Settings
This menu allows you to manually configure the network
communication settings between the PC600 and PayClock software.
Note: Typically these settings are determined during the installation
of the PayClock software and it isn’t necessary to modify the settings.
To enter into administrator mode at the PC600, press the Admin
button. The Enter PIN screen will display.
•
Using the numeric key pad enter the administrator PIN
number and press Enter.
•
The Administrator Main Menu screen will display.
•
Press Network Settings. The Network Setup screen will
display.
•
If you want to set the Host IP address IP press Define Host
and then press the Host IP button.
•
Using the numeric key pad enter the IP address of the
computer where the PayClock database resides and press
OK.
Network Setup - Time Source Settings
This option allows you to select where the PC600 will receive it’s
time from; the computer where the PayClock server is running or
from the Internet.
To enter into administrator mode, at the PC600 press the Admin
button. The Enter PIN screen will display.
•
Using the numeric key pad enter the administrator PIN
number and press Enter.