Lathem PC600 Series, Руководство пользователя

Страница: 14 / 96

P A Y C L O C K & P C 6 0 0 U S E R ’ S G U I D E
8
Step 3: Plug the RJ45 network cable into the Ethernet port and the
Power Adapter plug into the Power Adapter port which is located in
the compartment on the back of the terminal.
Step 4: Insert the small “L”-shaped security bracket into the slot at
the bottom-rear of the PC600, so that the tab with the hole points
downward, away from the keyhole slot that can be seen immediately
above.
Hang the terminal on the wall, aligning the three keyholes on the rear
of the enclosure with the three protruding screw heads, and then
pressing downward on the terminal housing until it lowers onto the
screws.
Screw the small screw into the hole of the tab from the small “L”-
shaped bracket at the bottom of the enclosure. This will fasten the
PC600 to the wall and keep it from being easily removed.
When finished, plug the power adapter into an AC wall outlet and
proceed to the software installation.