Lathem PayClock PC400, Инструкция по установке и эксплуатации

Страница: 24 / 37

18 - PC400 Terminal Installation & User’s Guide
Manual Bell Ring
With a supervisor badge, you can manually close the bell ringer relay. This function
could be used for fire drills or to test the bell circuit.
To manually close the bell ringer relay:
1.
Press # [enter], swipe your supervisor badge
2. “Supervisor Mode” with show on the terminal display
3. Within 5 seconds press 1 and then 1 again on the keypad, the relay will close and
activate the bell or buzzer for approximately 3 seconds. If you press 1 again within
5 seconds, the relay will close again. This can be repeated as many times, as you
like.
Setting up badges that can activate the Supervisor Mode
y
While in Terminal Manager open the PC400 Terminal Properties, from the Options
tab select up to 4 employees that will be able to make supervisor overrides at the
terminal.
y
Update the PC400/PC400TX terminal. The PC400/PC400TX terminal will now
accept the selected badge(s) as a supervisor badge.
For more information, see the Terminal Manager on line help.