Lasita Maja 7012302, Руководство пользователя

Страница: 36 / 37

„
Adjusting the gasket pressure at the
upper locking point on the locking side
(at the sash).
You can increase or reduce the gasket pressure using a Torx wrench T15, as shown below.
„
Adjusting the gasket pressure at other
locking points on the underside of the
sash.
„
Adjusting the gasket pressure at the
side of the sash at the top.
Installing the cover of the pivot-rest
„
Plug the long cover onto the pivot-rest
(1.).
„
Fasten the long cover by screwing in the
screw provided (2.) from the side.
„
Push the small cover at the bottom into
the pivot-rest until it snaps into place
(3.).
Installing the pivot-rest cover
1.
2.
3.
T15
T15
T15
Installation, operating and maintenance instructions
It is advisable to adjust the Fold&Slide system before mounting the cover.
7
NOTE
Also see chapter "Adjusting the Fold&Slide hardware" on page 3 .
Adjusting the gasket pressure
Installing the cover