Lasita Maja 7012302, Руководство пользователя

Страница: 27 / 37

Hardware adjustment
Adjustment at the rebate
corner-hinge
Adjustable
turn-brake
Adjustment of the Turn-Only hinge
TX 15 SW 4
Adjusting the pivot rest
Adjusting the pivot rest
Setting ± 2 mm
TX 15
Setting ±1 mm
TX 15
Setting
±
2 mm
SW 4
Setting
±
1 mm
TX 15
S 3,5 mm / -3 mm
TX 15
Setting
±
2 mm
TX 15
engage
disengage
Engaging and disengaging the stay
Adjusting the stay
S 3,5 mm / -3 mm
TX 15
Setting ±1 mm
TX 15
Vertical adjustment on bogie / pivot rest
Loosening and adjusting
- Hold the set bolt using an allen key
SW 4
- Loosen and hold the locknut using an
open-end spanner size 17
- Adjust vertically with Allen key SW 4
Locking
- Hold the set bolt using an Allen key
SW 4
- Firmly tighten locknut with open end
spanner size 17
+
-
+3,5
-1
Vertical adjustment
+ 3,5 mm / -1 mm
SW 4
-
+
Vertival adjustment on bogie and guide roll
+3,5
-1
Vertical adjustment
+ 3,5 mm / -1 mm
SW 4
Loosening and adjusting
- Hold the set bolt using an allen key
SW 4
- Loosen and hold the locknut using
an open-end spanner size 17
- Adjust vertically with Allen key SW 4
Locking
- Hold the set bolt using an Allen key
SW 4
- Firmly tighten locknut with open end
spanner size 17
Loosen
screws for
vertical
adjustment
+2
-2
-5 +1,5
+
-
-
+
Loosen screws for
horizontal adjustment
SW 4
SW 4
Fixing / removing the sash hinge cover
For attachment / removal of sash-hinge covers, the
setscrews on the back must be tightened / loosened.
Open sashes to access screws, if the F&S unit is
already installed.
See additional document
"Installation, operating and maintenance instructions"
Tools not supplied!
12