Manual: FX Series
page 8 / 26
English
6. General Operation
1. Power
Connect device power plug to the mains.
Make sure that your device is provided with the
correct voltage. Wrong voltage could lead to irreparable damages. Please find the correct
voltage data in the synoptical table at the end of this manual. Make sure that the device
is not directed to people or inflammable objects during installation. To start the device
just switch it on.
2. Modes / Functions
The different operation modes can be selected via the four buttons next to the „Set-
tings“ display.
„Mode“ button allows navigation through menu. Press once to jump to next menu
point.
„Up“ / „Down“ allows for changing values.
„Exit“ confirms a selection.
2.1. MENU DESCRIPTION
LED Display
Description
R 1
Single Red, the number shows the current rotation speed
G 1
Single Green, the number shows the current rotation speed
B 1
Single Blue, the number shows the current rotation speed
Y 1
Single Yellow, the number shows the current rotation speed
C 1
Single Cyan, the number shows the current rotation speed
P 1
Single Purple, the number shows the current rotation speed
H 1
Single White, the number shows the current rotation speed
AUTF
Auto mode with fast run
AUTS
Auto mode with slow run
AUTH
Auto mode with slow run for white color laser
A001
DMX mode, DXM address range from 1 to 511
SLAV
Slave mode
