Manual: FX Series
page 9 / 26
English
2.2. AUTO
Auto operation allows to random playback the internal sequences. They are played back
according to the internal system settings.
Select „AUTF“ for fast run by navigating with the „Up“ / „Down“ buttons and confirm with
„Enter“.
Select „AUTS“ for slow run by navigating with the „Up“ / „Down“ buttons and confirm with
„Enter“.
Select „AUTH“ for slow run for white color by navigating with the „Up“ / „Down“ buttons and
confirm with „Enter“.
2.3. DMX 512
The DMX mode requires a DMX controller or a Master laser (see 2.4. Master-Slave operation)
to be connected to the laser.
To switch to DMX mode, select „A001“ by navigating with the „Up“ / „Down“ buttons. Use the
„Up“ / „Down“ buttons to set the desired DMX address and confirm with „Enter“.
DMX Chart
The laser uses 7 DMX channels, so make sure that the next device uses an address that doesn’t
overlap with this range.
Channel
Value
Function
1
Operation mode
0 - 49
Laser off
50 - 99
AUTO Fast Mode, seven-color laser effect
100 - 149
AUTO Slow Mode, seven-color laser effect
150 - 199
AUTO White Mode, white color laser effect
200 - 255
DMX Manual Mode, CH2~CH7 valid
2
Red Laser Dimmer
0 - 255
Dimmer laser output power from 0% to 100%
3
Green Laser Dimmer
0 - 255
Dimmer laser output power from 0% to 100%
4
Blue Laser Dimmer
0 - 255
Dimmer laser output power from 0% to 100%
5
Strobe
0 - 4
No strobe
5 - 255
Strobe from fast to slow
6
Rotation Speed
0 - 255
Speed from fast to slow, 255 is stop
7
Rotation Direction
0 - 99
Clockwise rotation
100 - 199
No rotarion
200 - 255
Counter clockwise rotation
