Manual: Ecoline Series EL-500RGB KeyTEX
page 7 / 33
7. Operation
7.1 Power supply
Connect your EL-500RGB KeyTEX with the external PSU and connect it to the mains. Please
make sure that you are using the correct voltage. False voltages could destroy the device. Ple-
ase use the voltage specified at the end of this manual. Don‘t focus the front of the laser on
people while installation.
7.2 Switch on / off
Insert the key into the key switch on the back side of the laser and switch to “On“ to switch
the device on or to “Off“ to switch the device off. Please disconnect the device from the power
supply if you don‘t need it for a longer period.
7.3 Modes
Access the four different operating modes available in this product by using the MODE button
on the front panel. Pressing and holding the MODE button for 2.5 seconds will turn the pro-
duct on or off. Press MODE to cycle through the modes. Please see a description of each mode
below.
Mode
Description
Auto
Built-in auto programs
Scene
Pattern selection
Music
Music mode
Clock
Clock mode
Text
Text mode
DMX
DMX mode
7.4 IR remote controller
Cycles through auto pro-
grams
Sound-active mode
Pattern selection
ON / OFF button
Mirror effect
Pauses the effect
Clock mode
Text mode
Numeric keys
