Laserscale BL57-003NE Series, Инструкция по эксплуатации

Страница: 32 / 100

4-4
(E)
BL57-NE
4-4-1. Detailed Description of MODE Switches
MODE switches 1, 2, 4, 7, 9 and 10
These switches are not used. Always use in the OFF setting.
MODE switch 3 (Direction switch)
This switch is used to change the positional relationship between scale movement direction and A/B signal.
For more information, see section 4-5-1, “Changing the Direction.”
MODE switch 5
This switch is not used. Always use in the ON setting.
MODE switch 6 (Resolution setting switch)
This switch is used to set the resolution. For output form F types, setting this switch to ON sets 0.1
µ
m and
setting to OFF sets 0.05
µ
m. For G types, setting to ON sets 0.02
µ
m and setting to OFF sets 0.01
µ
m.
MODE switch 8 (Alarm mode switch)
This switch is used to select the alarm output format.
For more information, see section 4-5-3, “Setting the Alarm Reset Mode.”
4-5. Changing the Settings (For output format F, and G only)
4-5-1. Changing the Direction
MODE switch 3 (Direction switch) is used to change the positional relationship of the A/B signal with
respect to the scale movement direction.
MODE switch 3 Moves to head cable side
OFF A signal is leading
ON B signal is leading
Table 4-2
For output format A, refer to section 4-6-1.
4-5-2. Changing the Resolution
MODE switch 6 (resolution setting switch) is used to change the resolution of the A/B signal output type.
In the case of output format F: ON = 0.1
µ
m In the case of output format G: ON = 0.02
µ
m
OFF = 0.05
µ
m OFF = 0.01
µ
m
A
B
A
B