LaserLiner ClimaHome-Check, Руководство по эксплуатации

Страница: 5 / 52

ClimaHome-Check
05
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning
agents, scouring agents and solvents. Store the device in a clean and
dry place.
EN
The device has been optimised for use in fixed measuring
locations. Please wait 10 minutes after switching to a measuring
location with a significantly different level of humidity.
!
1 Inserting battery
Open the battery compartment and insert
battery according to the symbols. Be sure
to pay attention to polarity.
2
°C / °F
To set the required temperature unit, press and hold the „°C/°F“
button until the corresponding symbol appears on the display.
3
MAX / MIN
To determine the maximum or minimum temperature during a
measurement, press and hold the „MAX / MIN“ button until either
„MAX“ or „MIN“ appear on the display. The normal measuring
mode is set when no function flashes on the display.
4 CLEAR
By pressing the CLEAR button, the MAX and MIN values are reset.
Technical data
(Subject to technical changes without notice. 09.17)
Ambient temperature
Measurement range / Precision
0 °C ... 50 °C / ±1 °C
Relative humidity
Measurement range / Precision
20%rH ... 99%rH / ± 5%rH
(25%rH...85%rH, @152 m above
sea level)
Operating conditions 0 ... 50°C, 99%rH
Storage conditions 0 ... 50°C, 80%rH
Power supply
1 x 1.5V alkaline battery
(type AAA)
Dimensions (W x H x D) 66 x 57 x 17 mm
Weight (incl. battery) 47 g
EU directives and disposal
This device complies with all necessary standards for the
free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European Directive
on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=cliche