background image

4

QUAD 4000

NOTE:

 

Automatic Shutoff Feature:

 If after initial 

setup, the Quad 4000 is bumped or moved, the 
system shuts down to avoid line, square, plumb or 
level errors from occurring. 

!

12

13

15

16

17

18

14

2

6

8

7

11

9

10

3

4

5

1

4

3

5

18

19

1.  Power Button:

  System defaults to vertical 

and will start “seeking” the LineLokr (LL) 

automatically. If LineLokr is not turned on, 

the display reads  

“No Signal”

2.  Mode Button:

  You can select “Horizontal 

Mode” or “Vertical and Horizontal Mode” 

by toggling the button

3.  Mode Status: 

  Indicates what mode you 

are in 1 Vertical Mode, 2 Horizontal Mode, 3 

Vertical & Horizontal

4.  Battery Status:

  Indicates approximate 

battery life

5.  Self-Leveling Status:

  Indicates if unit is in 

process of leveling, or if it is level

6.  Manual Line Mode Button:

  The Quad 4000 

can manually be adjusted for line if LineLokr 

is not used

7.  Manual Line Left:

  With the Quad in 

“Manual Line Mode”, depressing this 

button drives laser to the left

8.  Manual Line Right:

  With the Quad in 

“Manual Line Mode”, depressing this 

button drives laser to the right

9.  Laser Plumb Bob: 

 Used to set Quad over a 

point when in vertical & horizontal mode or 

vertical only mode. Plumb- bob laser shuts off 

after 3 minutes to save battery power

10. 5/8x11 Mount:

  On bottom side of Quad for 

tripod mounting

11. Battery Door Knob:

  Turn ¼ turn to left 

to open door (Takes 4ea. D cell Alkaline 

batteries)

12. Horizontal (Level) Exit Window:

  Provides 

360° level control for your jobsite

13. Vertical Laser Exit Windows:

  Provides line, 

square and plumb control for your jobsite

14. Bulls Eye Bubble:

  For leveling to bring the 

Quad within its self-leveling range

15. Sighting Device:

  For aiming the Quad to the 

LineLokr

16. Communication Antenna: 

 Receives signal 

from the LineLokr to drive laser left or right 

for centerline

17. Molded Carrying Handle:

  Allows easy and 

sure handling of the Quad 4000

18. LCD Display:

  Displays function status of the 

Quad 4000

19. Radio Signal Strength:

  Displays signal 

strength between Quad and LinLokr

QUAD 4000 CONTROLS & FEATURES

Vertical laser exit 

windows on the 

front, rear, left  

and right

Содержание QUAD 4000

















Отзывы: