background image

Self Leveling

Electronic servo temperature compensation 

± 3° leveling range

Horizontal Accuracy

± 10 arc seconds 
± 1/16 per 100 feet  

(± 1.5mm/30M)

Baseline accuracy 

using LineLokr

To 1/16 (1.5mm) at up to 600 feet (183M) 

(Depending on conditions)

Square Accuracy

± 10 arc seconds
± 1/16 per 100 feet  

(± 1.5mm/30M)

Vertical (Plumb) 

Accuracy

± 15 arc seconds
± 3/32 per 100 vertical feet  

(± 2.25mm/30M)

Laser Range  

with Detector

1,500 Feet/457M Radius 

(Dependent on conditions and laser 

detector)

LineLokr

 Range

600 feet/183M 

(Dependent on conditions)

Battery Life  

(Quad 4000)

50 hours Standard Alkaline

Battery Life 

(LineLokr™)

70 hours Standard Alkaline

Quad 4000 Weight

10.5 lbs./4.76k

Quad 4000 Mount

5/8 x 11 Standard Tripod

Operating 

Temperature

0° to +120°F (-18° to +50°C)

Storage Temperature

-4° to +158°F (-20° to +70°C)

Quad 4000 

Rotation Speed

300 RPM

Laser Type/Class

635nm  Red Diode/Class 2

Number of Beams

3 Rotating, 1 Static

Beam Diameter

Rotating, .60” (1.52cm)/Static, .050” (1.27mm)

QUAD 4000 SPECIFICATIONS

WARRANTY

This product is guaranteed against defects in materials and workmanship for both parts and labor, under normal working conditions for one 

year from the date of purchase, except as noted herein. LaserLine Mfg., Inc. liability under this warranty is limited to repairing or replacing any 

product returned to an authorized service center for that purpose. Any evidence of attempts to repair this unit by other than factory authorized 

personnel automatically voids the warranty. LaserLine does not take liability for any damages caused by non-accuracy of this product. Before using 

the product always check for accuracy per the enclosed instructions in this manual
Warning! Under no circumstances, attempt to open or disassemble Laser Housing.
Doing so may cause exposure to potentially hazardous levels of laser radiation.

Factory Service Center

LaserLine MFG., INC.
1810 S.E. First Street, Suite H
Redmond, OR 97756

Factory Service:

 New Product Warranty service policy for new 

products stated above.

For all Warranty:

 Call Order Processing for RMA # at 541-548-0882.  

The Unit will be repaired and returned by prepaid freight.

Non-Warranty

Send to: LaserLine MFG., INC. at above address

Service Warranty:

 1 year on replacement Parts, 90 days on Labor.

FCC DECLARATION

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. this device may not cause any harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These 

limits are designed to prove reasonable protection against harmful interference in a residential installation. This equipment generates, uses and 

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 

the interference by on or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV technician for help.
The antenna connector is designed to fit the supplied antenna. Do not modify the antenna or 

connect any other type of antenna. If a replacement antenna is required, contact your dealer for 

an authorized antenna.
Any changes or modifications not expressly approved by the party responsible for compliance 

could cause the module to cease to comply with Part 15 of the FCC Rules, and thus void the 

user’s authority to operate the equipment.

A label is affixed to the outside of the 

LineLokr that reads:

©2018 LaserLine Mfg., Inc. All rights reserved.

1810 SE First Street, Suite H  
Redmond, OR 97756
Phone  541 548 0882
www.LaserLineMfg.com

Highest Quality - Most Versatile

Contains Transmitter Module

FCC ID: ZNS40105

This device complies with Part 15 of the 

FCC Rules. Operation is subject to the 

following two conditions: (1) this device 

may not cause harmful interference, and 

(2) this device must accept any interference 

received, including intererence that may 

cause undesired operation.

LASER LIGHT

DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

635nm, 1mW CW & 3.1uJ@5Hz

Содержание QUAD 4000

















Отзывы: