LaserLine QUAD 4000, Руководство пользователя

Страница: 9 / 16

7 QUAD 4000
AUTO LINE RESET FEATURE
If the signal between the Quad 4000 and the LineLokr is blocked, the display will read “NO SIGNAL” then
after one minute the system will shut down and then begin automatically searching for line again. During
the searching process time the 90° lasers are shut off so that you cannot take an inaccurate shot. Once
the Quad 4000 is again locked to line, then the 90° beams are reactivated and you’re ready to go back to
squaring or plumbing.
(This function does not work if the unit is in the manual line mode)
QUAD 4000 KNOCKED/DISTURBED AUTO SHUT DOWN FEATURE
If the quad 4000 is operating in the “Vertical Mode” and gets jostled or disturbed, the system will shut
down, so that no bad line or grade shots can be taken.
The Quad 4000 must then be reset which allows you to insure that the Quad is directly over your point for
maximum line, square and plumb accuracy.
WHAT HAPPENS WHEN YOU POWER UP THE QUAD AND LINELOKR?