LaserBit PICO Plus Series, Руководство пользователя

Страница: 27 / 32

LaserBit PicoPlus Series 1.0 page
27
9.1.5 Connecting to the management (only in case of E1)
Using the RJ11 Service
Connector and the two green
connectors you can connect your
management indoor unit to the
head.
The necessary signals can be
found on the blue and brown
wires of the head power cable.
You have to connect these two
wires into two pins of the four of
the two green connectors. These
pins are connected to the pins of
the RJ11 Service Connector. The
order of connections is the following:
Pin of the green connector 4
5 7 8
Pin of the RJ11 Service Connector 4 5 3 2
More details about the management please find to see LB View Users’ Manual.