STB-5000
USER MANUAL
9
Connection Method B: HDMI
HDMI (High-Definition Multimedia Interface) is the preferred connection method as the
HDMI cable (not supplied) allows full HD Digital signal transmission to the TV.
Best Used For:
Any TV that has an HDMI input.
Audio Connection
(For use with Amplifier or External speakers
Audio can be connected to an external amplifier / receiver.
Connect the Stereo Left and Right channels (White & Red) to the back of the Set Top Box and the
corresponding inputs on the back the audio device.
Connect a SPDIF Coaxial Audio Cable (not supplied) to the rear of the Set Top Box
and the corresponding inputs on the back the audio device for full surround sound.
FIRST TIME INSTALLATION
Once the STB-5000 has been connected to the power and
to the TV and after all audio connections have been made
properly, switch on TV.
If you are using the unit for the first time or have restored
the unit to Factory Default, the Installation Guide Menu will
appear on your TV screen.
OSD Language
To set the OSD (On Screen Display) Language press the
LEFT/RIGHT buttons on the remote until the desired
Language is displayed and then press the DOWN button.
Country
To change the Country Settings press the LEFT/RIGHT buttons on the remote until the desired
Country is displayed and then press the DOWN button.
Channel Search
Press OK to start the Channel Auto Search.
The System will now scan for the available channel in your area.
Found DVB-T Channels are shown in the left window and radio stations are displayed in the right.
Total progress is displayed in the bar below.
Press the EXIT or Menu Button to stop the scan at any time.
Once the Scan is complete the first Station is shown.
