STB-5000
USER MANUAL
19
the USB device when the first recording starts. All subsequent recordings will be saved to this folder
automatically
GENERAL INFORMATION
Recordings are automatically named as in the following example.
Press the RED button to view the recorded program in full screen.
Press the YELLOW Button to delete the file.
Press the GREEN button to rename the file.
Simple Program Recording.
Press the REC Button on the remote control to record the current program. Recording will start from
the moment the REC button pressed. Press the STOP button to end the recording. Recorded files can
be viewed through the PVR menu.
NOTE: this function requires a USB drive to be connected with enough room to record
the program.
Time Shifting Live TV
While watch a TV broadcast it is possible to pause the vision and then start the playback a few minute
later. Press the PAUSE button to the remote to pause the vision. When you ready press the PAUSE
button again to resume viewing.
The Status bar on the bottom of the screen will indicate how far behind the viewing time is
in relation to the actual broadcast.
Up to 1 Hour can be reviewed in this feature.
Use the REV and FWD buttons to fast forward or Rewind the vision.
Press the YELLOW button to enter a specific time to jump to.
Press the STOP to end the time shifting and then press the OK button to confirm.
NOTE: this function requires a USB drive to be connected with enough room to allow
the Time Shift Function to work.
Connecting a USB Device
In most cases connecting a USB FLASH drive will be a matter of simply plugging it I to the
USB port on the STB-5000.
Please remember that HD TV requires a large amount of space to record.
Please allow approximately 4GB per hour if recording HD programs. Less space will be
required for lower resolution programs.
