Section 3 - Basic Operations
Page 11
External LCD
Figure #5 shows the external LCD. You will notice that the main display is located
at the center of the screen and that display indicators are grouped by type.
Display Indicator Test
Refer to the instructions below and Figure #5 above to verify that all display
indicators are working properly.
1. Starting with the unit powered OFF, press and hold the POWER
button.
2. Verify that all indicators are displayed, by comparing the display to
the Figure #5 above.
3. Release the POWER button to start normal operation.
¶
If you do not release the POWER button, the unit will power
down after approximately 10 seconds.
Mode Indicators
Function Indicators
Unit
Indicators
Measurement Prompt Indicators
Status Indicators
Main
Display
Figure #5