Laser Technology Criterion RD 1000, Руководство пользователя

Страница: 10 / 36

Laser Technology, Inc. Criterion RD 1000 User’s Manual
Page 8
Other Buttons
Figure #4 shows the TRIGGER button and the SCALE ADJUST button.
FWD → System Menu: Moves to next menu item.
Edit function: Moves to the next digit (left to right).
MODE Moves through the operating modes.
DOWN ↓ System Menu: Toggles value.
Edit function: Decreases the digit value.
HUD brightness: Decreases the value.
Measurement result: Downloads data
(page 25) .
POWER When unit is OFF:
• Press and hold for a minimum of 2 seconds turns ON the
unit. For a brief time, all segments are displayed followed
by the firmware revision number, and then the unit is
ready for use.
• Press and Hold: external LCD shows all display segments
(10 seconds maximum).
When unit is ON:
•
Short press turns the display backlight ON/OFF.
• Long press (2 seconds minimum) turns OFF the unit.
L
To conserve battery power, if no button presses are detected for a
period of 15 minutes, the RD 1000 automatically turns itself OFF.
TRIGGER
Short Press: (1) Activates the in-scope LED (stays lit
for 30 seconds if no additional buttons are pressed).
(2) Accepts in-scope target points (such as tree
base, etc.).
Press-and-hold: Activates the tilt sensor, and
measurements are dynamically updated. Upon
release, the inclination reading is locked.
SCALE ADJUST (+)
Increases the width of the illuminated in-scope LED
Measurement Bar Scale.
•
Short Press: Increases the scale by one tick.
• Press-and-hold: Continuously increases the
scale width change.
SCALE ADJUST (-)
Decreases the width of the illuminated in-scope LED
Measurement Bar Scale.
•
Short Press: Decreases the scale by one tick.
• Press-and-hold: Continuously decreases the
scale width change.
Figure #4