Laser Mech FiberMINI 2.0 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 72

background image

PLMNL0243 REV. A, Effective Date: 03/24/16

ii

FiberMINI ™ 2.0 Operation Manual

INITIAL INSPECTION

Inspect all shipping containers for damage as soon
as the device arrives. It is your responsibility, the
recipient, to notify the freight company of any
damage. The freight company will require you to
provide the container that any goods were shipped
in, all shipping documentation and a list of all
damages. Photographs of the damage are helpful in
settling a freight claim.

Do not return damaged goods to the factory
without a Return Material Authorization Number
(RMA number).

Although it is Laser Mechanisms, Inc.’s intent to
insure you are up and running as soon as possible,
damage incurred during shipment must be settled
with the freight company before arranging for repairs
or replacement. No return shipments will be
accepted without an RMA number clearly printed on
the outside of all shipping containers. Failure to
follow this procedure could void any warranty
coverage on your head. Call your sales engineer at
Laser Mechanisms, Inc. for an RMA number.

Carefully remove the device from its shipping
container and all packing material to avoid damage.
Save all packaging material, including the sealed,
padded pelican case, in the event the head requires
shipping or storage.

Check all items received against the packing list
to verify that all the items were received.

Please note the product you receive may differ
slightly from the illustrations in this manual.
While the drawings may differ, the basic
procedures described within remain the same.

TERMS USED IN THIS MANUAL

WARNING:

The user could be injured

if the warning is not followed.

CAUTION:

The device or system

could be damaged if the CAUTION is
not followed.

NOTE:

Clarification of a step or steps.

SAFETY



WARNINGS:

Follow all warnings in this manual.



SAFETY GLASSES:

Everyone in the area

where the laser is being used must wear laser
safety glasses designed for the laser being
used.



SECONDARY REFLECTIONS:

Secondary

reflections are dangerous; never expose any
part of your body to a reflected laser beam.



INTERLOCKS:

Interlocks are safety devices

and should never be defeated.



ADJUSTMENTS:

Always turn off or put the

laser in standby before making any adjustments
to beam delivery components.



BEAM DUCT:

Never open any component of

the beam duct while the laser is operating.
Always turn the laser off before servicing any
beam duct components.



MANUALS:

Always read the instruction

manuals before attempting to install or make
adjustments to any beam delivery component.

«
1
2
3
4
5
...
»

Содержание FiberMINI 2.0









































































Отзывы:

Нет отзывов

Похожие инструкции для FiberMINI 2.0

Бренд: Garmin Страницы: 2

Бренд: Garelick Страницы: 4

Бренд: Jacobsen Страницы: 20

Бренд: Sagola Страницы: 62

Бренд: Tanco Страницы: 112

Бренд: Sable Страницы: 28

Бренд: GE Страницы: 37

Бренд: StarDental Страницы: 2

Бренд: USC Страницы: 29

Бренд: T&R Страницы: 26

Бренд: Lightolier Страницы: 2

Bernardo 1320 S

Бренд: PWA Страницы: 12

Бренд: Ask Страницы: 36

Бренд: ESD Страницы: 37

Бренд: Invacare Страницы: 2

Diverter SH 1500

Бренд: Interroll Страницы: 76

Бренд: CHART Страницы: 30

Compumotor 6200

Бренд: Parker Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды