Laser Mech FiberMINI 2.0, Руководство по эксплуатации, Страница: 11 / 72

PLMNL0243 REV. A, Effective Date: 03/24/16
5
FiberMINI ™ 2.0 Operation Manual
2.4.1 Fiber Insertion
It is the responsibility of the end user to
verify that the correct fiber type is
installed according to manufacturer
specifications.
See
Appendix F
– Fiber End Styles
for
more information.
To access the fiber installation location
(see
Figure 7 ):
1. If your clamp includes a shroud:

Verify that the shroud is in
place before attempting to
insert the fiber.

Slide the shroud up the fiber
to gain access to the clamp
screws.
2. Simply loosen the clamp screw
and insert the collimator
assembly.
3. Verify that the fiber is fully
engaged and tightened using the
clamp screws.
Great care must be taken to
ensure the optics remain clean.
Wipe any excess debris from the
head before servicing.
If the head is orientated with
vertical beam input, the head
should be rotated to prevent
debris from falling onto the
optics.
Figure 7