Larson Electronics Pneumatic Megatower, Руководство пользователя

Страница: 14 / 67

Megatower
Larson Electronics, LLC Phone: (877) 348-9680 Fax: (903) 498-3364 www.larsonelectronics.com 14 of 6 7
3. 7.)
Note: Check to ensure the fuel tank has an
adequate amount of fuel before running the
generator.
3. 8 .)
The keys to operate the job box are located inside the
locked box. Using a flathead screwdriver, open the job box by
turning the black locking mechanism on the right side and pull
out the operating keys.
Figure 3.8
3 .9.1)
Insert key and turn to the ON
position (1). Wait for the control module to boot
— this should take around 15 seconds. (2).
Make sure the main breaker is OFF (3).
Press the green Start button and wait for the
generator to start. Once the generator has
started, turn the main breaker ON.
Figure 3.9.1
On top of the job box and you should see an amber
beacon light flashing. If you do not see this light
flashing, make sure the mast safety pin is pulled
back all the way and
NOT
engaged. Once this is
confirmed, the beacon on top of the black job box
should be blinking amber. The mast will not raise to
an upright position if this pin is engaged.
Fi gure 3 . 9.2