2
Return to Table of Contents
I. Installation & Operation
NOTE: The EXP-EMG-EXT
line
is designed to be surface mounted to flat surfaces such as
walls.
I. Installation
Mounting for this fixture is achieved via
mounting tabs located on the back side
of the light.
The EXP-EMG-EXT explosion proof
emergency self-testing LED fixture is
NOT
a factory sealed fixture. Operators will bring
their own rigid conduit to a junction box and
complete their connects. Cap off any hubs
that are not in use.
Both battery legs
must be
connected
together. This prevents the battery from
draining during storage and transit.
DO
NOT CONNECT HIGH VOLTAGE TO
BATTERY LEGS.
Mounting Tabs
