oVerVieW
Read and follow all instructions before using these vacuums. Please read them carefully as failure to follow these
precautions could result in injury. When using electrical equipment, basic safety precautions should always be
followed.
WArninG:
The basic vacuum is designed for dry/damp pickup. Do not attempt to
pick-up liquids under any condition without using an automatic shut off assembly.
The following warnings should be adhered to reduce the risk of fire, electrical shock or injury:
1.
Do noT leave vacuum unatended when plugged in. Unplug from outlet when not in use and before servicing.
2. Electric shock could occur if used on wet surfaces. Do noT
expose to rain; store indoors.
3. Use only as described in this manual. Use only
Larson Electronics
’ recommended attachments and replacement
filters.
4.
Do noT use with damaged cord or plug. If vacuum is not working because it has been dropped, damaged, left
outdoors, or submerged in water, return it to
Larson Electronics
for servicing. Call 1-800-
369-6671
for a
return authorization number.
Do not return contaminated vacuums.
5.
Do noT pull, carry by cord, or use cord as a handle. Keep cord away from heated surfaces.
6.
Do noT unplug by pulling on cord. To unplug, grasp the plug.
7.
Do noT handle plug or vacuum with wet hands.
8.
Do noT put any objects into motor openings. Do noT use with openings blocked.
9.
Do noT vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
10. For toxic dusts, do not use without paper filter bag, intermediate filter, and HEPA filter properly installed.
11.
Do noT use in areas where flammable or combustible liquids, such as gasoline, may be present.
12.
Do noT use where oxygen or anesthetic gases are used.
13.
Do noT use an extension cord unless absolutely necessary. If an extension cord is required, the wire size
must be 14/3 or larger and should not exceed 50 feet in length. Extension cords must be three-wire type to
insure grounding protection.
14. Replace damaged or worn parts immediately with genuine original equipment to maintain safety.
note:
Absolute HEPA filtered vacuums meet AnSI Standard Z9.2-1979 with UL-586 tested and labeled HEPA filter.
2
