note: to insure a snug fit, make sure that the lid area and top edge of vinyl sealing gasket are free of
dirt and other foreign matter.
Steel Vacuum - Wet oPeration (oPtional)
initiAl SetUP
In order to use this vacuum for wet pickup you must install a wet pickup conversion kit, an optional accessory.
The kit consists of a conversion adaptor and wet pickup adaptor.
inStallation oF Wet conVerSion aDaPtor
1. Carefully remove the motor head, HEPA filter, and 2-ply intermediate filter. Set aside.
2. Set the wet pickup adaptor on the tank’s rim. next set the conversion adaptor on top of the wet pickup adapter
and snap down clamps.
3. Follow HEPA filter assembly installation instructions from previous page.
5