EPO-20A
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
4
of
4
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
EPO-20A
is designed to provide years of reliable performance. Should the need for replacement parts arise, please
contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
MAINTENANCE
Perform visual, electrical and mechanical checks of all components on a regular schedule. This should be determined by
the environment and frequency of use, but it is recommended that it should be at least once a year.
1. Make sure screws holding receptacle to back box are tight.
2. Clean receptacle face thoroughly
3. Make sure screws holding insulator in plug body are tight.
4. Clean all exterior parts of plug thoroughly.
WARNING:
If any part of the receptacle appear to be broken or shows signs of any damage – DISCONTINUE ISE
IMMEDIATELY. Replace, or properly repair the item before continuing service.
