EPLC2-LED-400W
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
3
4.
Connect supply wires to luminaire wire leads (or terminal blocks) per the
attached wiring diagrams using methods that comply with all applicable
codes. See Figure 2b. Tighten all electrical connections.
5.
Close driver housing onto cover module, making sure that all wires are
safely inside driver. Tighten captive closing screw to 30 in.-lbs. (3.4 N-m).
Ensure two (2) bosses on driver housing are in contact with cover module.
6.
Turn power on.
MAINTENANCE
1.
Perform visual, electrical, and mechanical inspections on a regular basis. The environment and
frequency of use should determine this. However, it is recommended that checks be made at least
once a year. We recommend an Electrical Preventive Maintenance Program as described in the
National Fire
2.
Protection Association Bulletin NFPA No. 70B: Recommended Practice For Electrical Equipment
Maintenance (www.nfpa.org).
3.
The lens should be cleaned periodically to ensure continued lighting performance. To clean, wipe the
lens with a clean, damp cloth. If this is not sufficient, use a mild soap or a liquid cleaner such as
Collinite NCF or Duco #7. Do not use an abrasive, strong alkaline, or acid cleaner. Damage may result.
4.
Visually check for undue heating evidenced by discoloration of wires or other components, damaged
parts, or leakage evidenced by water or corrosion in the interior. Replace all worn, damaged, or
malfunctioning components, and clean gasket seals before putting the luminaire back into service.
5.
Electrically check to make sure that all connections are clean and tight.
6.
Mechanically check that all parts are properly assembled.
REPLACEMENT PARTS
The EPLC2-LED-150W is designed to provide years of reliable lighting performance. Should the need for
replacement parts arise, please contact Larson Electronics at the contact information below.
Should further information not covered by these instructions be required, please contact Larson Electronics at
1-800-369-6671 or
Please visit LarsonElectronics.com for
Warranty
and
Return
information.
