![background image](http://html2.mh-extra.com/html/larson-electronics/eplc2-led-400w/eplc2-led-400w_instruction-manual_4779131003.webp)
EPLC2-LED-400W
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
3
of
3
INSTALLATION CHECKLIST
Verify sufficient lubricant is on conduit plugs
(recommend approximately 1/8” bead
around the first thread of plug) and that all
unused conduit entries on the cover module
are closed with lubricated plugs.
Verify conduit plugs are installed to at least
five (5) full threads into the cover module
conduit entries.
Verify installed conduit plugs are torqued to
42-52 ft.-lbs. for 3/4” plugs and 58-68 ft.-lbs.
for 1” plug.
Verify supply wires are connected to
luminaire wire leads (or terminal block) per
wiring diagrams.
Verify all electrical connections are
tightened.
Verify all wires are safely and neatly inside
driver housing and not on top of wire
terminal. Close driver housing onto cover
module.
Verify captive closing screw is tightened to
30 in.-lbs. (3.4N-m) and two (2) bosses on
driver housing are in contact with cover
module.