If ID Authentication is not disabled (see the
settings), a login window will open. In the Login window,
select a User Name with administrative privileges, enter its password, then click
OK
. A window of
Menu
icons will open.
Model
DVR-ALG-4CH
DVR-ALG-8CH
DVR-ALG-16CH
Video compression
H.264
Video input
4-ch
8-ch
16-ch
BNC interface (1.0 Vp-p, 75 Ω), supporting coaxitron connection
Supported HDTVI input
1080p / 25Hz, 1080p / 30Hz, 720p / 25Hz, 720p / 30Hz, 720P / 50Hz, 720p / 60Hz
Supported AHD input
720p / 25Hz, 720p / 30Hz
CVBS input
Support
IP video input
1-ch, up to 2.0 MP resolution
2-ch, up to 2.0 MP resolution
Audio compression
G.711u
Audio input
1-ch, RCA (2.0 Vp-p, 1 KΩ)
CVBS output
Support
HDMI / VGA output
1-ch, 1920 × 1080 / 60 Hz, 1280 × 1024 / 60 Hz, 1280 × 720 / 60Hz, 1
024 × 768 / 60 Hz
1-ch, 4K (3840 × 2160) / 30Hz,
2K (2560 × 1440) / 60Hz,
1920 × 1080 / 60 Hz,
1280 × 1024 / 60 Hz,
1280 × 720 / 60Hz, 1024 × 768 / 60 Hz
Encoding resolution
When 1080p Lite mode is not enabled: 1080p (non-real-time) / 720p / VGA / 960H / 4CIF / CIF;
When 1080p Lite mode enabled: 1080p lite / 720p lite / VGA / 960H / 4CIF / CIF
Frame rate
Main stream: 1/16 fps to real time frame rate
Sub-stream: 960H / 4CIF@12fps / 2CIF (non-real-time); CIF / QVGA / QCIF (real time)
Video bit rate
32 Kbps to 6 Mbps
Audio output
1-ch, RCA (Linear, 1 KΩ)
Audio bit rate
64 Kbps
Dual-stream
Support
Stream type
Video, Video and Audio
By default, the Setup Wizard will open automatically.
Important Notes for using the Wizard:
•
Password
Strong
” administrator user password. Follow the on-screen
NOTE
: There is no factory default
password for this device.
•
Date and Time
•
Storage - HDD
with it in this window. If you installed an HDD or replaced the HDD, that HDD needs to be initialized by the recorder before it can be used
to record data. Select (check the box for) that HDD, then click
Init
to initialize the disk.
NOTE
:
Init
will erase all data from the disk and
can take several minutes to complete. When the initialization is complete, click
Next
to continue.
•
Network Settings
: By default, the recorder acquires it’s network settings using DHCP (dynamic network settings). Depending on the
un-check the enable DHCP option in the network setup menu, and then click apply.
Step 7. Access the Menu system
functionality of the system. To use most menus, the user must log into the NVR system, either locally or remotely, with administrative
privileges. To open the Menu system from the Live View screen, right click anywhere in the screen, then select
Menu
.
3
of
4
www.larsonelectronics.com
Larson Electronics, LLC
