Function and device design
5
Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
3.2
Safe use
• Read and observe the safety notes in these operating instructions!
• Observe characteristic values and rated operating conditions on the rating and data
plates!
• Observe additional information plates on the device!
• Use the device in accordance with its intended and approved purpose only!
• We cannot be held liable for damage caused by incorrect or unauthorized use or by
non-compliance with these operating instructions.
• Before installation and commissioning, make sure that the device is not damaged!
• Work on the device (installation, maintenance, overhaul, repair) may only be carried
out by appropriately authorized and trained personnel.
3.3
Modifications and alterations
4
Function and device design
The device can be used in hazardous areas of Zones 1, 2, 21, 22 and in the safe area.
The inspection light 6149 is designed for use as a portable workplace light. The optional
mounting brackets allow the inspection light to also be used as a machine light.
DANGER
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or alter the device. No liability or warranty for damage
resulting from modifications and alterations.
WARNING
Danger if used in aggressiv ambient conditions!
The explosion protection is impaired!
• Do not use when exposed to kerosene, ammonia and phosphorus
vapour.
• The enclosure can be damaged.
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only according to the operating conditions described in
these operating instructions.
Larson Electronics, LLC.
(800) 369-6671 | [email protected]
www.LarsonElectronics.com