Spartan 730/730IS Dosimeter Manual
Setting a Measurement Timer
44
3.4.1 Setting a Timed Stop Measurement Timer
When enabled, the Timed Stop measurement timer begins when you select Run,
and automatically stops after running (gathering data) for the amount of time
you set, as described in this section.
Step 1.
Press and hold
select
to open the menu.
Step 2.
Highlight, then
select
Settings
from the list. This opens the Settings
menu.
Step 3.
Highlight, then
select
Timers
from the Settings menu.
Step 4.
Highlight, then
select
Mode
from the list. This opens the Timer Mode
screen.
Step 5.
From the Timer Mode screen, highlight, then
select
Timed Stop
. This
returns you to the Timers menu.
Step 6.
From the Timers menu, highlight, then
select
Duration
.
Step 7.
On the Duration screen, set the duration of the timed measurement in
hh:mm:ss format.
Using the Dosimeter Buttons to Set Timer Duration
•
Press the
up
or
down
button to change the digit.
•
Press
select
to set the digit and progress to the right.
TAKE NOTE
Quick press
POWER
to step back to the left at any time. When your
measurement timer is set, quick press
power
to exit one menu at a
time.
3.4.2 Setting a Daily Measurement Timer
The Spartan 730 enables you to set one or more time periods per day (daily
timers) during which the dosimeter will automatically power on, take a
In this section, use
UP
or
DOWN
on the dosimeter to
highlight an option. Use
SELECT
to set the option. Quick
press
power
to step up one level in a menu.
