Larkin Auto Fan Control, Инструкции по установке, эксплуатации и обслуживанию

Страница: 8 / 14

8
Fan Input Power From Breaker Panel: Check the power source to see if it is compatible with the requirements
of the provided system. The AFC wiring diagram lists the proper Phase, Voltage, and Amp load. Verify input
power voltage before connecting to starters or contactors. Field wire proper Phase and Voltage from the breaker
panel to the correct terminals in the Control Box for each fan being controlled.
Fan Output Power From Contactor(s) or Starter(s):
Field wire output power to proper fan from contactor(s) or
starter(s) terminals T1 and T2 (1 Phase) or T1, T2, and T3 (3 Phase). Check rotation of fan(s). Note: Exhaust
fan(s) will move some air in reverse (See rotation arrow on fan). Changing rotation may be accomplished by
reversing any two leads from the 3 Ph starter(s) in the Control Box to the fan(s). For 1 Ph fan(s), see instructions
on motor plate to reverse rotation.