•
Use a screwdriver to remove the two open-ring guide bands
(
N13
) and replace them;
• Use a size 22 spanner to unscrew the lower stem (
N12
);
• Unscrew the stem valve (
N14
) altogether, check the surface
of the ball seating (
N15
) that comes into contact with the
ball (
N16
).
If worn, replace them;
• Use a screwdriver to remove the O-Ring (
N17
) and replace
it making sure it is aligned correctly
(as illustrated)
;
• Screw the valve stem
(
N14
) on again and tighten fully, grip-
ping the valve in a vice. To tighten, use a 22 mm spanner;
the use of a thread paste is recommended;
Ed. 001 - 12/2015
www.larius.eu
ZEUS LINER
24
N13
N12
N14
N15
N16
N17
N14
