I3
I2
I3
I1
I4
I5
I6
II
• Release the residual pressure by holding down the trigger
of the gun and pointing it into a container.
• Eliminate the paint remaining within the tank (
I2
) by placing
the re-circulation tube (
I3
) into a container.
• Open the recirculating-safety valve (
I4
).
CLEANING AT THE END WORK
•
Reduce pressure to the minimum (
turn counterclockwise
the pressure control knob (
I1
)
).
• Turn the pressure adjustment (
I1
) handle slightly clockwise
to make the machine function at minimum pressure
(pump
activated)
, until the tank has been completely emptied then
shut off the pump by bringing the handle (
I1
) to its minimum
position.
• Fill the tank (
I2
) with wash fluid.
• Clean the walls of the tank with a brush.
• Turn the pressure adjustment (
I1
) handle slightly clockwise
to make the machine function at minimum pressure
(pump
activated
).
• Make sure the re-circulation tube (
I3
) is inserted into a
container and wait for clean wash fluid to come out of it.
• Turn the pressure adjustment handle (
I1
) to minimum
(pump
stopped)
.
• Place the re-circulation tube back into the tank.
• Keep the gun’s trigger pressed to release any residual
pressure.
• Remove the nozzle from the gun and wash it separately.
• Closed the recirculating-safety valve
• Turn the pressure adjustment handle (
I1
) slightly clockwise
to make the machine function at minimum pressure
(pump
activated
).
• Point the manual gun (
I5
) into a container (
I6
), drain the
residual paint and wait for the wash fluid to come out clean
the entire spraying circuit.
Follow the washing procedure before using again
the equipment.
• Empty all of the wash fluid from the tank and turn off the
equipment.
• Turn the pressure adjustment handle (
I1
) to minimum
(pump stopped)
.
• Shut off the motor.
• In case of long storage, we recommend you to suck and
to leave light mineral oil inside the pumping group and the
flexible hose.
Ed. 001 - 12/2015
www.larius.eu
ZEUS LINER
17
