6
DALì
English
F4
0
OFF
OFF
0
F3
•
Check the mains voltage corresponds to the equipment’s
rating (
F1
).
•
The supply cable (
F2
) is provided without plug.
Use a plug which guarantees the plant earthing.
Only a technician or a skilled person should perform the
connection of the plug to the electric cable.
CONNECTION OF THE TOOLING TO THE POWER SUPPLY
• Check the ON/OFF switch (
F3
) is on the "
OFF
" position (
0
)
before connecting the cable to the mains.
• Place the pressure control knob (
F4
) on the “
MIN
” position
(
turn counterclockwise
).
WASHING OF THE NEW EQUIPMENT
•
The equipment has already been adjusted at our factory with
light mineral oil left inside the pumping group as protection.
Therefore, wash with diluent before sucking the product.
Should anyone use an extension cable
between the tooling and the socket, it must
have the same characteristics as the cable
supplied (minimum diameter of the wire 2.5
mm
2
) with a maximum length of 50 mt. Higher
lengths and lower diameters can provoke excessive voltage
falls and also an anomalous working of the equipment.
F1
F2
