Lapierre FUSION X2, Руководство пользователя

Страница: 18 / 56

16
Lapierre Equipment |
FUSION X 2 EVAPORATOR
| USER MANUAL | Version 01 - September 2022
SECTION 5
START-UP, OPERATION AND SHUTDOWN PROCEDURES
5.1 EVAPORATOR START-UP
The following are the steps to start up the evaporator.
5.1.1 Check connections for leaks and tightness
Check the following connections for leaks and tightness:
• the concentrate connector,
• the pan connector.
5.1.2 Check for leaks and floats
• Fill the pans with water, then perform the following checks and adjustments:
- check for leaks,
- check for proper operation of each level float,
- adjust the float for the desired liquid level of the pan(s):
o the level of the boiling rear pan should be 1 in. (2.54 cm) above the tubes,
o the minimum level of each syrup pan for start-up is 2 in. (5.08 cm).
5.1.3 Check the fans
IMPORTANT | Before each start-up of your evaporator, it is important to make sure that the fans are working
properly.
Your evaporator is equipped with two or three fans depending on the model: one or two fans for primary
combustion and one fan for secondary combustion. The purpose of these fans is to activate the combustion
and increase the power of your FUSION X
2 .
Used first, the primary air fan(s) pushes air under the fuel load and feeds the fire’s rise. The secondary air fan
then pushes air over the load to complete the combustion, improving the efficiency of the evaporator and
eliminating smoke emissions.
Fan operation is controlled by two potentiometers (rotary knobs). One for the primary air fan(s), and the other
for the secondary air fan.
PROTECT CHILDREN
• Never allow children to use this equipment.
• Never leave children unattended in proximity to this equipment, whether it is switched On or not.
Also be especially cautious with other PEOPLE NEAR THE EQUIPMENT , whether they are
children, family members, guests, as well as with pets .