manualshive.com logo in svg

Lantronix SLC8, Руководство пользователя для менеджера, Страница: 266 / 299

Поделиться
Скачать
Lantronix SLC8 Скачать руководство пользователя страница 266

SLC™ Console Manager User Guide

266

Appendix C:  Safety Information

This appendix describes the safety precautions that should be followed when installing and 
operating the SLC console manager. It contains the following sections:

 Cover

 Power Plug

 Input Supply

 Grounding

 Fuses

 Rack

 Port Connections

Cover

Do not remove the cover of the chassis. There are no user-serviceable parts inside. Opening or 
removing the cover may expose you to dangerous voltage that could cause fire or electric shock. 

Note:

Refer all servicing to Lantronix, Inc.

Power Plug

When disconnecting the power cable from the socket, pull on the plug, not the cord.

Always connect the power cord to a properly wired and grounded power source. Do not use 
adapter plugs or remove the grounding prong from the cord.

Only use a power cord with a voltage and current rating greater than the voltage and current 
rating marked on the unit.

Install the unit near an AC outlet that is easily accessible.

Always connect any equipment used with the product to properly wired and grounded power 
sources.

To help protect the product from sudden, transient increases and decreases in electrical 
power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

Do not connect or disconnect this product during an electrical storm.

Input Supply

This unit may have more than one power supply source. Disconnect all power supply sources 
before servicing to avoid electric shock.

Check nameplate ratings to assure there is no overloading of supply circuits that could affect 
over current protection and supply wiring.

Содержание SLC8












































































































































































































































































































Отзывы:

Нет отзывов