manualshive.com logo in svg

Lantronix SLC8, Руководство пользователя для менеджера, Страница: 188 / 299

Поделиться
Скачать
Lantronix SLC8 Скачать руководство пользователя страница 188

13: Maintenance

SLC™ Console Manager User Guide

188

3.

Click the 

Run Diagnostics

 button. 

Figure 13-8

 shows the page that displays. 

Ping

If you enter a host name in the corresponding 

Hostname

 field, the SLC console 

manager verifies that the host is up and running. Check the 

Ethernet Port

 button 

(Both, Eth1, or Eth2), and check the 

IPv6

 box.

Note:

The Ethernet Port option restricts ping transmission to both Ethernet 

ports, Eth1, or Eth2. The IPv6 box should be checked if the host that is pinged 
requires IPv6 addressing or routing.

Send Packet

This option sends an Ethernet packet out one of the Ethernet ports, mainly as a 
network connectivity test.

Enter the following:

Protocol: 

Select the type of packet to send.

Hostname: 

Specify a host name or IP address of the host to send the packet to.

Port: 

Specify a 

TCP

 or 

UDP

 port number of the host to send the packet to.

String: 

Enter a set of up to 64 characters. The string is encapsulated in the 

packet (so you could use a network sniffer to track the packet and, by looking at 
its contents, verify that it was sent).

Count: 

The count is the number of times the string is sent. 

For UDP, the number of times the string is sent is equal to the number of packets 
sent. 

For TCP, the number of times the string is sent may (or may not) be equal to the 
number of packets sent, because TCP controls how data is packetized and sent 
out.

Loopback

This option tests a Device Port by transmitting data out the port and verifying that 
it is received correctly (requires the loopback cable be plugged in the Device 
Port).

SLC Internals

This option displays information on the internal memory, storage and processes 
of the SLC console manager.

Содержание SLC8












































































































































































































































































































Отзывы:

Нет отзывов