12: User Authentication
SLC™ Console Manager User Guide
200
3.
Select or clear the checkboxes for the following rights:
Data Ports
The ports users are able to monitor and interact with using the
connect direct
command. Enter the port numbers or the range of
port numbers (for example, 1, 5, 8, 10-15).
U1
denotes the USB port on
the front of the SLC console manager. For SLC/SLB models with an
internal modem,
U2
denotes the internal modem.
Clear Port Buffers
The ports whose port buffer users may clear using the
set
locallog clear
command.
Enable for
Dial-back
Select to grant a user. Users with dial-back access can dial into the SLC
unit and enter their login and password. Once the SLC device
authenticates them, the modem hangs up and dials them back. Disabled
by default.
Dial-back Number
The phone number the modem dials back on depends on this setting for
the device port. The user is either on a fixed number, or on a number that
is associated with the user’s login (specified here).
Escape Sequence
A single character or a two-character sequence that causes the SLC
console manager to leave direct (interactive) mode. (To leave listen
mode, press any key.)
A suggested value is
Esc+A
(escape key, then uppercase "A" performed
quickly but not simultaneously). You would specify this value as
\x1bA
,
which is hexadecimal
(\x)
character 27
(1B)
followed by an
A
.
This setting allows the user to terminate the
connect direct
command on the command line interface when the endpoint of the
command is
deviceport
,
tcp
, or
udp
.
Break Sequence
A series of one to ten characters users can enter on the command line
interface to send a break signal to the external device. A suggested
value is
Esc+B
(escape key, then uppercase “B” performed quickly but
not simultaneously). You would specify this value as
\x1bB
, which is
hexadecimal
(\x)
character 27
(1B)
followed by a
B
.
Custom Menu
If custom menus have been created you can assign a default custom
menu to the group. See
for more information.
Display Menu at Login
Check the checkbox to display the menu at login.
Full Administrative
Right to add, update, and delete all editable fields.
Networking
Right to enter network settings.
Services
Right to enable and disable system logging, SSH and Telnet logins,
SNMP, and SMTP.
Secure Lantronix
Network
Right to view and manage Secure Lantronix units (e.g., SLP, Spider, or
SLC units) on the local subnet.
Date/Time
Right to set the date and time.
Local Users
Right to add or delete local users on the system.
Remote Authentication
Right to assign a remote user to a user group and assign a set of rights
to the user.
SSH Keys
Right to set SSH keys for authenticating users.
User Menus
Right to create or edit a custom user menu for the CLI.
Web Access
Right to access Web-Manager.
Diagnostics & Reports
Right to obtain diagnostic information and reports about the unit.
Reboot & Shutdown
Right to use the CLI or shut down the SLC device and then reboot it.
Содержание SLC16
Страница 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48 ...
Страница 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings ...
Страница 150: ...10 USB Port SLC Console Manager User Guide 150 Figure 10 3 Devices USB Modem 3 Enter the following fields ...
Страница 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config ...
