Lantronix SDSTX3110-124-LRT-B Скачать руководство пользователя страница 57

Страница: 57 / 94

Lantronix

SDSTX3110-124-LRT-B User Guide

33686 Rev. C

https://www.lantronix.com/

4.4.4 Management

4.4.4.1 Access IP Control

The Access IP Control List lets you add host IP addresses to prevent unauthorized access. If a host’s IP address

is in the accessible IP table, the host will be allowed to access the SDS Manager.

Label

Description

Enable IP Filtering

Leaving the box unchecked means any host can access the device

server. The default is unchecked. Check the box to enable IP filtering

(whitelist) of the specified IP addresses.

Activate the IP

Check the box to activate the IP address.

IP Address

Only the host with the specified IP address can access the device

server. The format should be IP address /255.255.255.255 (e.g.,

“192.168.0.1/255.255.255.255”).

Netmask

Only the host on the specified subnet can access the device server.

The format should be IP address /255.255.255.0 (e.g.,

“192.168.0.1/255.255.255.0”).

Click the

Apply

button when done to apply the changes.

Содержание SDSTX3110-124-LRT-B































































































Результаты поиска

Содержание SDSTX3110-124-LRT-B

Отзывы:

Lantronix SDSTX3110-124-LRT-B, Руководство пользователя, Страница: 57 / 94

Результаты поиска

Содержание SDSTX3110-124-LRT-B

Отзывы: