Lantronix SDSTX3110-124-LRT-B Скачать руководство пользователя страница 35

Страница: 35 / 94

Lantronix

SDSTX3110-124-LRT-B User Guide

33686 Rev. C

https://www.lantronix.com/

4.2 Service Mode

4.2.1 Virtual COM Mode

In Virtual COM Mode, the driver establishes a transparent connection between a host and the serial device by

mapping the port of the serial server serial port to a local COM port on the host computer. Virtual COM Mode

supports up to five simultaneous connections, so that multiple hosts can send or receive data by the same serial

device at the same time.

Label

Description

Data Port

Set the port number for data transmission.

Edit IP Port Number

Check the checkbox to allow changing the Data Port number.

Control Port

Displays the control port number (read only).

Map Virtual COM

Click to select a Virtual COM name to map on.

Idle Timeout

When a serial port stops data transmission for a defined period of

time (Idle Timeout), the connection will be closed and the port will be

freed and try to connect with other hosts.

means the function is

disabled which is also the factory default value. If multilink is

configured, only the first host connection is effective for this setting.

Alive Check

The serial device will send a TCP alive-check package in each

defined time interval (Alive Check) to remote host to check the status

of TCP connections. If the TCP connection is not alive, the

connection will be closed and the port will be freed.

means the

function is disabled which is also the factory default value.

Содержание SDSTX3110-124-LRT-B































































































Результаты поиска

Содержание SDSTX3110-124-LRT-B

Отзывы:

Lantronix SDSTX3110-124-LRT-B, Руководство пользователя, Страница: 35 / 94

Результаты поиска

Содержание SDSTX3110-124-LRT-B

Отзывы: