Lantronix MSS1-T, Справочное руководство

Страница: 82 / 117

Change Secondary Commands
6 - 22
6.47 Change Secondary
Users can configure a secondary gateway, loadhost, and nameserver in case the primary ones are
unreachable. For information, please see the Change Gateway, Change Loadhost, and Change
Nameserver
command entries.
6.48 Change Serial Delay
Changes the amount of time the MSS will allow serial characters to accumulate before sending
them out to the Ethernet.
Restrictions Requires privileged user status
Parameters number
Enter the number of milliseconds for the delay. The range is 0 to 2,000 and
is rounded to the nearest 10 milliseconds.
6.49 Change Session Limit
Limits the number of active sessions on the server’s single port.
Restrictions
Requires privileged user status.
Parameters number
Enter a value between 0 and 8.
Default
Four
6.50 Change Signal Check
Determines whether the MSS will check for the DSR signal when connections are made from the
network to the serial port. If the DSR signal is not present, the connection will be rejected.
Restrictions Requires privileged user status.
Does not apply to the MSS485.
Default Disabled
CHANGE SERIALDELAY number
CHANGE SESSION LIMIT number
CHANGE SIGNAL CHECK
DISABLED
ENABLED
 
 
 