manualshive.com logo in svg

Lantronix MSS1-T, Справочное руководство

Поделиться
Скачать
Lantronix MSS1-T Скачать руководство пользователя страница 70

Change Gateway

Commands

6 - 10

6.17    Change Gateway

Specifies the host that is to be used as a TCP/IP gateway between networks. If a connection to a 
machine on a different network is attempted, messages will be directed to the gateway for 
forwarding. 

Restrictions

Requires privileged user status.

Errors

If a gateway is not defined, an error will be returned.

Parameters

Secondary
Configures a secondary gateway to be used when the primary gateway is 
unavailable.

IPaddress
Specify a host using the numeric IP address format. Specifying an IP 
address of 0.0.0.0 removes the previously-defined gateway.

See Also

Change Subnet Mask, page 6-25.

6.18    Change Inactive Logout

Determines whether a port will be automatically logged out after a period of inactivity. Inactivity 
is defined as having no keyboard or network activity on the port. The inactivity period is set with 
the Change Inactive Timer command. Open network connections will be closed before logout.

Restrictions

Requires privileged user status.

Default

Disabled

See Also

Change Inactive Timer, page 6-11.

CHANGE  SECONDARY  GATEWAY IPaddress

CHANGE INACTIVE LOGOUT  

DISABLED

ENABLED

Содержание MSS1-T






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды