manualshive.com logo in svg

Lantronix MSS1-T, Справочное руководство

Поделиться
Скачать
Lantronix MSS1-T Скачать руководство пользователя страница 75

Commands

Change Name

6 - 15

Errors

Modem Control must be disabled to use DSRlogout. Modem Control 
implies Dsrlogout, in that the MSS will attempt to log out any 
connections if the port’s DSR signal is de-asserted.

Default

Disabled

See Also

Change DSRlogout, page 6-8.

6.30    Change Name

Renames the MSS. The unit’s default name, which is based on its default Ethernet address, is 
printed on its underside.

NOTE:

Changing the server name will also change the name of advertised IPX SAP pack-
ets, which will affect Redirector operation. See your Lantronix Redirector docu-
mentation for more information.

Restrictions

Requires privileged user status. 

Errors

The server name must be unique to the network.

Parameters

serverName
A string of up to 16 characters. Strings must be enclosed in quotes if they 
contain lower-case letters, spaces, or punctuation.

6.31    Change Nameserver

Specifies the nameserver to be used during TCP/IP connections. This host will attempt to resolve 
text host names into numeric IP address form.

Restrictions

Requires privileged user status.

Parameters

Secondary
Specifies a secondary nameserver to be used when the primary 
nameserver is unavailable.

IPaddress
Specify a host using standard numeric format—host names cannot be 
resolved via a nameserver. 

See Also

Name Resolution, page 4-3.

 CHANGE NAME serverName

CHANGE  SECONDARY  NAMESERVER IPaddress

Содержание MSS1-T






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды