Lantronix Maestro E205XT02 Скачать руководство пользователя страница 67

Страница: 67 / 213

Network

E220 Series Cellular Router User Guide

Parameters

Description

•

IPv6 routed prefix -

Enter the public prefix direct the client

distribution to the router.

•

DHCP Server (Only for LAN)

- Provide static details for

configuring DHCP Server.

•

General Setup

Ignore interface –

DHCP is disabled when

Ignore interface is checked.

•

IPv6 Settings

Router Advertisement-Service –

Select the

Router Advertisement-Service mode; disabled,
server mode, relay mode, hybrid mode.

DHCPv6-Service –

Select the DHCPv6-Service

mode; disabled, server mode, relay mode, hybrid
mode.

NDP-Proxy –

Select the Router Advertisement-

Service mode; disabled, relay mode, hybrid
mode.

Announced DNS servers –

Add the DNS

servers.

Announced DNS domains –

Add the DNS

domains.

DHCP Client

Enter the Hostname to be sent to a DHCP server when requesting
for IP Address.

PPPoE

•

PAP/CHAP username –

Enter the PAP/CHAP username.

Click

to reset the password. The default password is

admin.

•

PAP/CHAP password –

Enter the PAP/CHAP password.

•

Access Concentrator –

Enter the access concentrator

name.

•

Service Name –

Enter the service name.

Note

•

Access Concentrator name and Service Name gets auto
populated from PPPoE Access Point Router if they are not
explicitly provided

PPPoATM

•

Protocol support is not installed

–

Click Install package

“ppp-mod-pppoa” to install the protocol support.

•

PPPoA Encapsulation –

Select the PPPoA encapsulation

method; VC-Mux and LLC.

•

ATM device number –

Enter the ATM device number.

•

The default ATM device number is 0.

•

ATM Virtual Channel Identifier (VCI) –

Enter ATM Virtual

Channel Identifier (VCI) number.

•

The default VCI number is 35.

•

ATM

Virtual Path Identifier (VPI) –

Enter ATM Virtual

Path Identifier (VPI) number.

•

The default VPI number is 8.

Содержание Maestro E205XT02






















































































































































































































Результаты поиска

Содержание Maestro E205XT02

Отзывы:

Lantronix Maestro E205XT02, Руководство пользователя, Страница: 67 / 213

Результаты поиска

Содержание Maestro E205XT02

Отзывы: