Lantronix Maestro E205XT02, Руководство пользователя, Страница: 123 / 213

Network
E220 Series Cellular Router User Guide 123
D. Diagnostics
Screen 10-40: MWAN Interface and Service Diagnostics
Parameters Description
MWAN Interface Diagnostics Select the interface to run the diagnostic test on. Click one of the
following diagnostic test that must be performed on the selected
Interface:
•
Ping Default Gateway – Ping the default gateway
configured for the Network Interface. The gateway is
reachable if a ping response is received else there is a
problem in the local network.
•
Pink Tracking IP - Ping the tracking IP Address
configured in MWAN for the Network Interface. The
tracking IP Address is reachable if a ping response is
received else there is a conflict in the network configuration
on the default gateway.
•
Check IP Rules – Click to verify the Interface.
•
Check Routing Table – Click to verify the routes present
in the routing table of E200 Router.
•
Hotplug ifup – Click to turn-up the Interface using the
hotplug script.
Note
•
If the interface is already up, the hotplug script will restart
the Interface.
•
Hotplug ifdown – Click to turn down the Interface using
the hotplug script.
MWAN Service Control Click the following buttons to perform following MWAN functionality:
•
Start MWAN – Starts load balancing/failover service.
•
Stop MWAN – Stops the running load balancing/failover
service.
•
Restart MWAN – Stops the running load
balancing/failover service and restart it.
Table 10.2-14: MWAN Interface and Service Diagnostics