manualshive.com logo in svg

Lantronix LSS2200-8P, Инструкция по установке, Страница: 5 / 47

Поделиться
Скачать
Lantronix LSS2200-8P Скачать руководство пользователя страница 5

Lantronix  

LSS2200-8P Install Guide  

33860 Rev. A                                                

https://www.lantronix.com/

  

5 

1.  Introduction 

Product Description 

The LSS2200-8P is a managed Layer 2+ Gigabit Ethernet switch offering eight (8) 1GBase-T interfaces with full 

IEEE 802.3bt 90W support, two (2) 10/5/2.5/1GBase-T multi-gigabit SFP+ slots, two (2) programmable Digital 

Input/Outputs with 12V power output, and one (1) RJ-45 console port. The switch features Near Field 

Communications (NFC) support for simplified transfer of pre-configuration onto units prior to powering up and 

dispatching to install sites (coming soon).    
The LSS2200-8P switch offers 720W total PoE budget for powering LED lighting, high-powered security and 

surveillance cameras and other IP devices. Its small footprint and hardened temperature rating make it ideal for 

powering IP devices distributed throughout a building. The LSS2200-8P also incorporates Bluetooth Low Energy 

(BLE) for wireless CLI without requiring physical access to troubleshoot, configure or reset the device. Cloud 

management and APIs for integrating with building management systems make the switch very easy to deploy 

and manage. The embedded Smart Device Manager (SDM) software is easy to use and simplifies configuration, 

installation, and troubleshooting of devices to help lower construction and maintenance costs. The LSS2200-8P 

helps commercial building owners and managers improve building efficiency and enhance the tenant and guest 

experience within buildings. 
The device comes pre-enabled with easy-to-use Lantronix ConsoleFlow™ device management for the Cloud, 

which allows users to find specific switches, check device properties and scan through telemetry status data in 

real time from anywhere. 
The Lantronix ConsoleFlow Cloud device manager provides cloud-based control of your Lantronix LSS2200-8P 

PoE network switch. ConsoleFlow Cloud provides a single pane of glass to deploy securely, monitor, and manage 

Lantronix network switches and connected IT equipment when purchased with the LS Series switch.  
LEVEL™ Technical Services provides dedicated technical experts to assist with your unique solutions. Lantronix 

provides direct 24/7 phone support, a limited lifetime warranty, and full access to our technical resource center 

with purchase of Level Technical Services. 

About This Manual 

This manual describes how to install, connect, and troubleshoot the switch, including how to: 

•

  Install the switch 

•

  Check switch status by reading the LED indicators 

•

  Reset the switch or to restore the switch to factory defaults 

•

  Use a Web browser to initially configure the switch 

•

  Troubleshoot the switch 

Note that this manual may provide links to third party websites for which Lantronix is not responsible. 

Related Manuals 

•

  LSS2200-8P Quick Start Guide, 33859  

•

  LSS2200-8P Install Guide, 33860  

•

  LSS2200-8P Web User Guide, 33861  

•

  LSS2200-8P CLI Reference, 33862  

•

  LSS2200-8P REST API User Guide, 33863  

•

  LSS2200-8P MobileApp User Guide, 33870 

•

  Release Notes (revision specific) 

 

 

Содержание LSS2200-8P
















































Отзывы:

Нет отзывов