Lantronix LSS2200-8P Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 47

Lantronix LSS2200-8P Скачать руководство пользователя страница 17

Lantronix

LSS2200-8P Install Guide

33860 Rev. A

https://www.lantronix.com/

17

LED Summary

Each port has one or more LEDs to indicate port and/or PoE status. The RJ-45 ports have two LEDs and the

SFP+ ports have one LED as described and shown below.

LED

Condition

Meaning

Each RJ-45

TP port

Left LED green

On = Link at 1G, Blinking = Link Activity.

Left LED yellow

On = Link at 10G or 100Mbps, Blinking = Link Activity.

Right LED green

On = 802.3bt Powered, Blinking = Error.

Right LED yellow

On = 802.3at or 802.3af Powered, Blinking = Error.

Each SFP

Fiber port

LED green

On = Link at 10G, Blinking = Link Activity.

LED yellow

On = Link at 1G/2.5G/5G, Blinking = Link Activity.

System LEDs

Power (P) LED green

On = Power on.

At power up, Blinking = boot up or re-boot in progress.

After successful boot, Blinking = Firmware update in progress.

System (S1) LED green On = connected to cloud.

Blinking = re-establishing cloud connection.

System (S1) LED yellow On = no cloud connection.

Blinking = cloud provisioning in progress.

PHO green

On = PoE Hardware Override enabled,

Off = PoE Hardware Override disabled. Note: Currently disabled by

default; do not override until fully supported.

BLE LED

LED Off

BLE broadcast is disabled.

LED Amber

BLE broadcast is enabled but BLE is not paired.

LED Green

BLE is paired.

LED Blinking Amber

BLE firmware update in progress.

«
...
15
16
17
18
19
...
»

Содержание LSS2200-8P
















































Отзывы:

Нет отзывов