Hardware Interfaces
FOX3-2G/3G/4G Series Hardware Manual
26
7.
Hardware Interfaces
This chapter describes the hardware interfaces:
Interface specifications
Main Port
The 8pin double-row connector, type: MOLEX-43045-08-MICRO FIT. It provides IN/OUT, power
supply and first serial port (SER0) lines. The same pin functionality as FOX-IN/EN.
Accessory Port
The 6pin double-row connector, type: MOLEX-43045-06-MICRO FIT. It provides 1-Wire bus, I²C
master interface, second serial port (SER1).
10pin-Mini-USB
10pin mini-USB port with SPI interface and USB - Master interface.
Optical LED Indicators
3 x LED indicators, free programmable using PFAL commands to show the device current state .
Mounting Holes
4 x mounting holes for attaching the device to a suitable location (use M4x20 self tapping or
machine screws for mounting,
not included
).
Audio interface
The audio connector has a diameter of 2.5 mm which allows to connect a SPK/MIC device to the
FOX3-2G/3G/4G.
Hint:
Only FOX3 and FOX3-3G-AUDIO have this connector and support audio for
speaker and microphone.
External Antenna Ports
FAKRA connectors for connecting GSM & GNSS antennas.
Battery tray
It is used to insert and connect the battery to the device.
SIM Holder
It is used to insert your SIM card into the device for using GSM/GPRS services.
Table 7:
Interface specifications
Figure 5:
Interface specifications for FOX3-2G/3G/4G devices.
